Description
Experience a new realm of comfort and convenience on your adventures with the Stealth Air Pro Pants. Tailored for the modern adventure motorcyclist, these pants boast an innovative design for functionality.
- Knee+Shin: Cerros Zero-G CE Level 2 EN 1621-1:2012 (K+L Type A) (T+/T-)
- Hip: Cerros-Zero-G H1B Aysmmertic Hip Protector CE Level 2 EN 1621-1:2012 (Type A) (T+/T-)
- Tail Bone: Pocket ready for tail bone protector
- KneeSlap Technology: Rynox Exclusive knee protector positioning mechanism
- Increased Low Light Visibility: Retro-reflective panels
- Mesh: 3D mesh with dual-fold knit
- Outer Shell: 600D PU coated polyester
- DWR Shell: Durable Water Repellent coated polyester
- Slide Zones: Invista Cordura® panels at knees
- Monsoon Ready: Compatible with H2Go Pro 3 Rain Pants (Sold Separately)
- Winter Ready: Dupont Sorona fill. Attaches to the inside of the outer shell
- Fit: Dualsport ADV touring fit
- Ventilation: 2 intake vents, 2 exhaust vents
- Stretchable Fabric: Stretch panel behind the knee
- Fit Modulation: Micro metric girth adjuster on thigh,waist and bottom hem
- SuperGrip: High-grip contoured panels, for complete ride control
- Cargo Capacity: 4 pockets
Step 1 – Prep
- Remove all impact protectors
- Undo all zippers, Velcro and buckles
- Shake off any surface dirt
- Use a soft brush if required
Step 2 – Which Detergent?
- Use (in order of preference)
- Purpose-made tech-wash
- Neutral unscented liquid detergent
- Woolen liquid detergent
- Baby shampoo
- Completely Avoid
- Any type of granular powder detergent
- Any type of heavily scented liquid detergent
Step 3 – Soak
- Dissolve 1 cap of detergent per garment, in a bucket of lukewarm water
- Soak for at least 30 minutes
- Avoid hot water. Test with your fingers first. If it’s too hot for your fingers, it’s too hot for your gear.
Step 4 – Wash and Rinse
- Agitate and scrub with your hands
- Focus on spots with grease and grime
- Repeat until clean
- Rinse multiple times until free of detergent
- Avoid using hard, abrasive brushes. Use a soft brush if required
Step 5 – Let Dry and Store
- Put on a hanger and let dry in a cool ventilated shaded area
- Once dry, store in a cool, ventilated moisture-free place, away from house-dust
- Do not wring. Do not tumble dry. Do not iron. Do not bleach. Do not expose to direct sunlight while drying.
